Review of Park Tool PCS-12 Home Mechanic Bench Mount Repair Stand

Park Tool PCS-12 Home Mechanic Bench Mount Repair Stand
By: Park Tool Average Rating: 5.0 Total Reviews: 10
More Information

Park Bench Top Work Stand

On: 2010-03-05

This workstand is compact and ideal if you have a workbench to connect on to. I havent done it yet, but intend to connect workstand onto wood that connects into my vise for easy removal. I have had good luck with most Park tools! The workstand is probably best rated as moderately durable. There are more dureable (and more expensive) workstands, for commercial, but this is perfect for recreational use.

Clamps Like a Champ

On: 2010-02-28

The clamp works as advertised. Fully adjustable, it fits any bike that I have tried, some very large tubes and some small. Will hold a bike on the vertical seat tube and on the top tube. Was easy to install with a few bolts and wingnuts for easy removal. Make sure that you have enough room for the bike wheels on each side when you put it in, and that you put it right at the edge of the bench or table its going on, but other than that, this is a great item for small spaces. I can take it off and use the workbench just like regular. I think I used quarter-inch bolts.

All I need!

On: 2010-02-28

This clamp fits perfectly in my 4" vise. I am able to do everything I need to maintain my bike. Very well made product.

Do It Yourself Park Bike Stand

On: 2010-02-05

This clamp is very solid and simple to operate once it is mounted. I did not have a work bench, so I mounted it to a couple of four feet high vertical boards fastened to an old liquor cabinet. I fastened the clamp to the boards using two long bolts and four smaller diameter bolts with eyelets. Each long bolt passes through the eyelets of two smaller bolts, one on each side of the boards before the nut is fastened. The eyelet threaded ends are then fastened to the clamp. The boards are narrow to allow the eyelet bolts to be outside and to reach up to the clamps mounting holes. The clamp is just long enough for the pedals to clear when mounted this way.

Park Bench Mount Bicycle Repair Stand

On: 2009-11-27

Excellent option for a bike repair stand when space, both work and storage, is an issue. Can be quickly mounted when needed then dismounted and stored away when not needed. Exceptional Park Tool Company quality.

Bench Mount for Bike Maintenance

On: 2009-11-10

Really like this product. Its built very well and solid. Mounted it to a 2X6 which is then C clamped to my workbench so I can take it off and move it out of the way when not in use. I have several bikes and like to keep them well tuned. I have a Park Tool hand pump which is built just as well.

nice stand

On: 2009-10-16

very nice product from Park Tool...I would expect no less

strong, sturdy and easy to use, I would recommend this product to any home mechanic.

Parks tools are first class!

On: 2009-08-16

I have an extremely heavy work bench to mount the bike stand. Holds Bike very secure and rotates well. The grooves in the top and bottom of the holding clamp allows cables to pass through without binding. I plan to buy more Parks tools in the future. Parks tools are first class...

Works great

On: 2009-04-02

Strong and sturdy and easy to use. I installed mine on some scrap plywood made into a T so I could use it in my workbench vise, but just take it out when not needed.

This is the One

On: 2009-01-01

Ive bolted this stand to my B&D Workmate, used it on many occasions, and it has served very well. Afterward it can be broken down and stored away compactly until the next season. The clamps allow a bike to be rotated and locked into any position.