Review of Pyramid Bicycle Crank Puller Tool

Pyramid Bicycle Crank Puller Tool
By: Pyramid Average Rating: 5.0 Total Reviews: 2
More Information

Great Product

On: 2008-04-29

At first I was skeptical of this working since the price was so low, but it actually worked! Very satisfied with my purchase.

Compact, well made

On: 2007-04-07

This tool will do the job. Still, some square taper cranks can be very difficult to remove, even with the correct tool. You will need to use it with two wrenches you own. You may need to get or make something to slip into the bolt hole in the crank so the end of the tool has something to push against rather than go down farther into the hole and possibly damage the bottom brackets spindle threads. A piece of 1/4 inch rod cut to the right length for the hole in your spindle works well. It appears the flats that accept the wrenches are both 16 mm., so a Crescent wrench may be required on one set of flats (unless you have two 16 mm wrenches). There is also a hex fitting on the end that could accept a hex wrench on a ratchet. This tool is small enough to carry with you on a ride, if need be. While the price is very good, do not forget the expense of shipping costs.